Faculdade

Testes

 

ARTIGOS EM REVISTAS (WOS) / PAPERS IN JOURNALS (WOS)

 2013

  • Aelenei L., Aelenei D., Lollini R. Gonçalves H., Donn M., Garde F., “Design Issues in Net Zero-Energy Houses”, Open House International, 38(3), pp. 7-14, 2013.
  • Baltazar L.G., Henriques, F., Cidade, T., “The use of rheology in the study of the composition effects on the fresh behaviour of hydraulic lime grouts for injection of masonry walls”, Rheologica Acta, 52 (2), pp. 127/138, 2013.
  • Basaglia, C., Camotim, D., Gonçalves, R., Graça, A., “GBT-based assessment of the buckling behaviour of cold-formed steel purlins restrained by sheeting”, Thin-Walled Structures, 72, pp. 217-229, 2013.
  • Biscaia, H. C., Chastre, C., Silva, M. A. G., “Linear and nonlinear analysis of bond-slip models for interfaces between FRP composites and concrete”, Composites Part B: Engineering, 45 (1), pp. 1554-1568, 2013.
  • Biscaia, H. C., Chastre, C., Silva, M. A. G., “Modelling GFRP-to-concrete joints with interface finite elements with rupture based on the Mohr-Coulomb criterion”, Construction and Building Materials, 47, pp. 261-273, 2013.
  • Biscaia, H. C., Chastre, C., Silva, M. A. G., “Nonlinear numerical analysis of the debonding failure process of FRP-to-concrete interfaces”, Composites Part B: Engineering, 50, pp. 210-223, 2013.
  • Biscaia, H. C., Chastre, C., Silva, M. A. G., “A smeared crack analysis of reinforced concrete T-beams strengthened with GFRP composites”, Engineering Structures, 56, pp. 1346-1361, 2013.
  • Brás, A., Gião, R., Lúcio, V., Chastre, C., “Development of an injectable grout for concrete repair and strengthening”, Cement & Concrete Composites, 37, pp. 185-195, 2013.
  • Brás, A., Leal, M., Faria, P., “Cement-cork mortars for thermal bridges correction. Comparison with cement-EPS mortars performance”, Construction and Building Materials, 49, 315-327, 2013.
  • Clément, T., Ramos, A. P., Fernández Ruiz, M., Muttoni, A., “Design for punching of prestressed concrete slabs”, Structural Concrete, 14, pp. 157-167, 2013.
  • Faria, D., Lúcio, V., Ramos, A., “Discussion: Strengthening Two-Way Reinforced Concrete Floor Slabs Using Polypropylene Fiber Reinforcement by Matthew J. Radik, Ece Erdogmus, and Travis Schafer”, Journal of Materials in Civil Engineering (ASCE), 25 (8) p. 1142, 2013.
  • Faria, D., Lúcio, V., Ramos, A., Marti-Vargas, J., “Discussion: Pull-out and push-in tests of bonded steel strands”, Magazine of Concrete Research, 65 (18), pp. 1128-1131, 2013.
  • Faria, G., Chastre, C., Lúcio, V., Nunes, A., “Compression behaviour of short columns made from cement-bonded particle board”, Construction & Building Materials, pp. 60-69, 2013.
  • Gonçalves, R., Camotim, D., “Buckling behaviour of thin-walled regular polygonal tubes subjected to bending or torsion”, Thin-Walled Structures, 73, pp. 185-197, 2013.
  • Gonçalves, R., Camotim, D., “Elastic buckling of uniformly compressed thin-walled regular polygonal tubes”, Thin-Walled Structures, 71, pp. 35-45, 2013.
  • Gonçalves, R., Camotim, D., “On the behaviour of thin-walled steel regular polygonal tubular members”, Thin-Walled Structures, 62, pp. 191-205, 2013.
  • Gonilho-Pereira, C., Faria, P., Fangueiro, R., Martins, A., Vinagre, P., Ratão, S., “Performance assessment of waste fibre-reinforced mortar”, Materials Science Forum, 730-732, pp. 617-622, 2013. 
  • Larrinaga, P., Chastre, C., San-José, J. T., Garmendia, L., “Non-linear analytical model of composites based on basalt textile reinforced mortar under uniaxial tension”, Composites Part B: Engineering, 55, pp. 518-527, 2013.
  • Mamede, N., Ramos, A., Faria, D., “Experimental and Parametric 3D Nonlinear Finite Element Analysis on Punching of Flat Slabs with Orthogonal Reinforcement”, Engineering Structures, 48, pp. 442-457, 2013.
  • Marques, P., C. Chastre, Nunes, Â., “Carbonation service life modelling of RC structures for concrete with Portland and blended cements”, Cement and Concrete Composites, 37, pp. 171-184, 2013.
  • Pontes, J., Santos Silva, A., Faria, P., “Evaluation of pozzolanic reactivity of artificial pozzolans”, Materials Science Forum, 730-732, pp. 433-438, 2013.
  • Santos, F. A., Cismaşiu, C., Pamies Teixeira, J., “Semi-active vibration control device based on superelastic NiTi wires”, Structural Control and Health Monitoring, 20, pp. 890-902, 2013.
  • Silva, M. A. G., Biscaia, H., Marreiros, R., “Bond–slip on CFRP/GFRP-to-concrete joints subjected to moisture, salt fog and temperature cycles”, Composites Part B: Engineering, 55, pp. 374-285, 2013.
  • Silva, M. A. G., Biscaia, H. C., Chastre, C., “Influence of Temperature Cycles on Bond between GFRP and Concrete”, ACI Structural Journal, 110 (6), pp. 977-988, 2013.
  • Silva, R., Faria, D., Ramos, A., Inácio, M., “A physical approach for considering the anchorage head size influence in the punching capacity of slabs strengthened with vertical steel bolts”, Structural Concrete, 14, pp. 389-400, 2013.

Navegação